Wishes For New Born Baby Greeting

Restoration: polished metal parts

Clean the outside entering between the fins, for iron and 'normal oxidation of the surfaces and not' quell'ossido surface which prevents the taking of paint as any traces of oil. The best solvent and 'the thinner but it may do some damage if you touch the rubber parts and plastic or painted surfaces. Perhaps a final puree with a rag on a bit 'wet, ever thinner. Then isolate the whole and a slight verniciatina with the canister.

Before mopping, perhaps by a beautiful brushed with a wire brush at all, preferably with brass bristles and then blows the compressor to disperse the dust and dirt that have moved during brushing. A beautiful cloth soaked in a coiled not too good detergent Aggressive, elbow grease and nothing more. Then a beautiful painted with black paint to the cylinders for high calories and see what a great result! Be careful not to paint the bottom of the cylinders because it is part of the base and should be left aluminum color!

For other metal parts polished (not chrome!)
use felt disc special and abrasive paste. The disk has a center bolt that allows it to be attached to the spindle of a trapano.Tu turn on the drill, just flip the disc over the abrasive paste, so soak it well and then you turn on the bright side as well to clean everything . If you do not have the equipment listed above, simply use a rag and a good rubbing compound and elbow grease it takes forever.

For chrome ( fenders, exhaust, tank side panels )
uses a special paste for chrome , located in the Auto Components or all of motorcycle accessories shops, the usual rag and rubs! To share painted using a polish , those are good for the body of the car, maybe not too aggressive. As the council cleaners

Fulcron of Arexons or AcquaZero of the same brand. The thermal paint is already paint definitiva.Usa basta.Non usarne and that no other because the heat could also be painted fuoco.Per cover their heads and the base of the cylinders with plenty gummed (practically the masking paper). To remove any traces of paint ended up on the wrong place using the nitro .